• 0

    No products in the basket.

CMMME Prima DCC Decoder - 32 Outputs for Servos, LEDs and Relays
CMMME Prima DCC Decoder - 32 Outputs for Servos, LEDs and Relays - Image 2
CMMME Prima DCC Decoder - 32 Outputs for Servos, LEDs and Relays - Image 3
CMMME Prima DCC Decoder - 32 Outputs for Servos, LEDs and Relays - Image 4

CMMME Prima DCC Decoder – 32 Outputs for Servos, LEDs and Relays

(18 customer reviews)

Price range: £70.00 through £79.00

CMMME Prima is a 32-output DCC accessory decoder for model railways, designed to control servos, LEDs and relays with web-based setup.

SKU: Prima Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Introducing Prima - Our most advanced decoder.

Prima is our third product to market Currently, there are no other commercial solutions that allow you to operate 32 outputs for as little as £2.50 each. Our previous two were based on Arduinos.  However, whilst both reliable and cost-effective, ease of operation was limited. 

Changes to configuration would have to be done via editing code via a computer and uploading via a physical connection – not suitable for layouts where units are mounted underneath a layout. 

Our easy-to-use web interface allows you to connect to it via its own WIFI access point, or alternatively connect Prima to your own WIFI network. 

Once you have made your changes using the manual found here, saved and restarted your decoder, you’re ready to go! 

Prima allows for both physical and DCC control of these outputs which can be assigned to either a LED, Relay or Servo, with the ability to have a physical button or DCC command, giving the ability to control multiple outputs with the same input. 

An example of this would be to push a button, changing the direction of the servo to change a turnout, at the same time the relay would change the polarity of the track and illuminate a led for a control board. All done with one button push or DCC command. 

Resourced for Prima can be found here:

https://cmmme.co.uk/prima/

   

Overview

Hardware 

Prima is made up of four components. 

  • An Esp32 development board, providing the processing power and connectivity for all interfaces. 
  • (2) PCA9685 12 bit PWM drivers. 
  • An in-house designed PCB. Allowing for the above to be interfaced together. Including a DCC interface, 5v input and 16 terminals for physical buttons. The DCC input is opto isolated protecting the decoder from higher voltage track power. 
  • A 3d printed mount.  
  • A 5V 2A DC Power Supply. 

Software 

A key focus in the development of the Prima was to ensure ease of control and setup. 

Previous hardware developments by ourselves have involved editing Arduino code, whilst we ensured this was easy to do, we understand this can be overwhelming and time consuming.  

With Prima all configuration can be done via a web browser, simply by connecting your phone, tablet, laptop or computer to the WIFI network created by Prima. 

Once connected, you have the ability to configure each of the 32 outputs.  

Requirements

A 5V 2A DC power supply.

 A phone, tablet, laptop or computer with WIFI connectivity.

Questions?

We have invested time and money into Prima’s development and are confident in its ability.

If you have any doubts or questions please contact us via the enquire now button at the top of this page.

Support. 

Chesterfield model making and miniature electronics will provide lifetime support for your Prima purchase. 

Support can be obtained via the following methods: 

Email: contact@cmmme.co.uk  

Facebook: https://www.facebook.com/ChesterfieldModels/ 

Phone: Telephone number available upon request. 

 Warranty 

A 12-month warranty is provided from the date of purchase. 

Warranties are transferable,  however the original invoice must be provided. 

Any hardware or software modifications will make this warranty void. 

 30-day money-back guarantee 

If for any reason you are not happy with your purchase we will accept your order back with no quibbles. 

Your order must be as new condition without any modifications.  

Return postage to be paid by the buyer. 

Additional information

Weight 0.2 lbs
Dimensions 10.5 × 11.5 × 2 in
Include 5v 2a power supply

Yes, No
Upgrade to full protective case

Yes, No

17 reviews for CMMME Prima DCC Decoder – 32 Outputs for Servos, LEDs and Relays

1-5 of 17 reviews
  1. Malcolm Wright
    Verified owner

    It is well made. Yet to install. Will provide feed back when installed

  2. John
    Verified owner

    Great service and really helpful

  3. Philip B.
    Verified owner

    Big thank you Sam your patience and perseverance sorting out my woes has been over and above what was required. First class customer service

  4. Richard Smith
    Verified owner

    Really good equipment

  5. Richard
    Verified owner

    Fast problem free delivery

Add a review
Currently, we are not accepting new reviews

You may also like…

Related products

4.9 Google rating Read our reviews